Serving the Richmond area  ·  (804) 823-8960  ·  Open Mon-Sun 7am-7pm
📞 (804) 823-8960 Free Quote

Metal Roofing in Powhatan, VA (23139) · Local Professionals

Richmond Metal Roofing · Fast response in Powhatan and the Richmond area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+353Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Powhatan is horse country and working farmland just west of Richmond, where long gravel driveways lead to brick ranches, farmhouses, and outbuildings that have seen decades of Virginia weather. If you live out here off Route 60 or near Powhatan State Park, you know that a roof has to handle more than just rain: it has to stand up to open-sky wind, summer hail, and the kind of debris that comes with acreage and tree lines.

That is why homeowners and property managers in 23139 call Richmond Metal Roofing. We understand the mix of older farm structures and newer custom homes out here, and we know that when a barn roof starts leaking or a porch roof on a century-old farmhouse starts to fail, you need someone who can get to the property, assess it honestly, and fix it without a lot of runaround.

Metal Roofing in Powhatan (23139)

Powhatan is different from the city neighborhoods we serve. Lots are larger, grades roll more, and access can be tight for equipment. Many properties have a main house plus a detached garage, a shop, or a barn, and each building has its own roofing needs. Exposed-fastener panels are common on agricultural buildings because they are cost-effective and straightforward to maintain, while standing seam and metal shingle systems are increasingly popular on homes where curb appeal matters. The clay and sandy soils here drain well in most spots, but we still check how water sheds off the roof and where it goes, especially on sloped driveways and around outbuildings. Tree cover is another factor: loblolly pines and hardwoods drop limbs and needles that can clog valleys and gutters, and that debris holds moisture against panels. We have replaced and repaired roofs on farmhouses, equestrian facilities, and newer builds throughout Powhatan and the surrounding counties, and we bring that experience to every estimate.

Our services in Powhatan

How a Job Works in Powhatan

It starts with a call to (804) 823-8960 or a request through our site. We schedule a free on-site assessment at your property in Powhatan, and we look at the roof, the attic if accessible, the flashing details, and how the building sits on the land. We will talk through what we find, what your options are, and what it will cost before any work begins.

Once you approve the scope, we pull the required permits through Powhatan County and schedule the work. On rural properties, we plan for equipment access and staging so we do not tear up lawns or block driveways. If your home is in a neighborhood with architectural review or an HOA, we help you understand what documentation the board may need for panel profile and color approval. Our crews are used to working around livestock, outbuildings, and the kind of tight spots that come with older farm layouts.

When the job is done, we clean up thoroughly, haul away old material, and walk the property with you. We do not consider a job finished until you have had a chance to inspect the work and ask questions.

Pricing in Powhatan depends on the building, the system, and the condition of what is already there. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and retrofitting over existing shingles around $7. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, and coating or painting around $2.50 per square foot. Agricultural and commercial projects are quoted individually because the range of building types is so wide. The biggest cost factors are roof size and pitch, access and staging, whether we are tearing off existing layers, and how quickly you need us out. Call (804) 823-8960 for a free estimate and a straight answer on what your roof actually needs.

My barn off Route 60 has exposed-fastener panels that are backing out screws and leaking. Can you repair that without replacing the whole roof?
Yes, in many cases. We replace the failed fasteners with larger or properly sealed screws, re-seat washers, and check the panel laps and flashing. If the panels themselves are rusted through or the purlins are compromised, we will tell you that upfront and talk through replacement options. We work on agricultural buildings throughout Powhatan regularly.
A storm just took off part of my roof and it is supposed to rain tonight. How fast can you get to Powhatan?
Call us at (804) 823-8960 right away. We prioritize active leaks and storm damage, and we can often get out the same day or next day to tarp or make temporary repairs so your property is protected. We also document the damage for your insurance claim if you are filing one.
What does a typical metal roof replacement cost for a 2,000 square foot house in Powhatan?
For a straightforward replacement with a standard panel system, you are often looking at roughly $18,000 to $24,000 depending on pitch, access, and whether we are removing existing shingles. Standing seam and specialty metals run higher. We give you a firm number after we see the roof, not a phone guess.
Do I need a permit from Powhatan County to replace my roof?
In most cases, yes. Powhatan County requires permits for roof replacements, and the requirements can vary based on the scope of work. We handle the permit application and inspections as part of the job, and we stay current on local requirements so you do not have to chase down the building department.
My neighbor says my new metal roof will send more water onto their property. What are the rules on that?
Roof runoff is governed by drainage and grading, and we design gutter and downspout systems to direct water away from structures and property lines. If you are in an HOA, we can provide the documentation they need for approval. If there is a specific drainage concern with a neighbor, we will look at the site and recommend a solution that keeps water where it belongs.
Are you insured for work on my property in Powhatan?
Yes. We carry general liability insurance and workers' compensation coverage. We are happy to provide proof of insurance before we start, and we recommend asking any contractor you hire for the same.
What maintenance should I do on a metal roof in Powhatan to keep it from leaking?
Keep gutters and valleys clear of pine needles and leaves, especially if you have loblolly pines nearby. Check fasteners and sealant around flashing and penetrations once a year, and after major storms look for lifted panels or loose screws. A periodic inspection can catch small issues before they become leaks, and we offer free estimates for that kind of check.
Why choose us?

Trusted professionals in Richmond

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Richmond

All your work handled by qualified professionals in Richmond

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

353+ Verified Client Reviews in Richmond

⭐⭐⭐⭐⭐ 4.9/5 · 353 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Richmond · Response within 24h · No commitment · ☎ (804) 823-8960

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Richmond ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm