Serving the Richmond area  ·  (804) 823-8960  ·  Open Mon-Sun 7am-7pm
📞 (804) 823-8960 Free Quote

Metal Roofing in Bon Air, VA (23235) · Local Professionals

Richmond Metal Roofing · Fast response in Bon Air and the Richmond area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+353Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Bon Air is a neighborhood of brick ranches and split-levels from the 1950s through the 1970s, built among tall pines and hardwoods just south of the James River. The lots are established, the driveways are often narrow, and the roofs take a beating from shade, debris, and Virginia humidity. If your shingles are streaked with algae or you are tired of patching the same leak, we can help.

Richmond Metal Roofing serves Bon Air (23235) and the surrounding Richmond area with metal roof installation, repair, and replacement. We know the housing stock here, from the low-pitched roofs near Buford Road to the larger lots off Huguenot Road, and we bring the right approach for each home. Call (804) 823-8960 for a free estimate.

Metal Roofing in Bon Air (23235)

Bon Air sits on rolling ground with a mix of clay and sandy soil, and many properties have mature trees that drop limbs, pine needles, and sap on roofs and in valleys. The tall pines that give the neighborhood its character also keep roofs shaded and damp, which is why algae streaks and moss are so common on the original shingles. When we install or replace a metal roof here, we pay close attention to ventilation and flashing details, because the combination of shade and humidity can trap moisture if the roof is not detailed correctly. Access can be tight on some of the older streets, and we plan for that with careful staging and protection of landscaping.

Our team has worked on homes throughout Bon Air and the Richmond area, from simple ranch roofs to more complex split-level designs. We understand how the local climate, with hot summers, occasional hail, and winter freeze-thaw cycles, affects metal roofing systems, and we install products and fasteners that are suited to this region.

Our services in Bon Air

How a Job Works in Bon Air

Step 1: You call us at (804) 823-8960 or request a free estimate online. We schedule an on-site assessment at a time that works for you, and we inspect your roof, attic, and flashing details. We will discuss your options, whether that is a metal roof over shingles, a full replacement, or a repair, and provide a written estimate.

Step 2: Once you approve the estimate, we handle the permitting process with the appropriate local building department, since roofing permits are commonly required for replacement and re-roofs. We also coordinate with any HOA design review if your neighborhood has one. On the scheduled day, our crew arrives with materials and equipment, protects your landscaping and driveway, and completes the work according to the agreed scope. For Bon Air homes with tight access or steep grades, we plan the logistics in advance to keep the job running smoothly.

Step 3: After the work is complete, we clean the site thoroughly, including a magnet sweep for nails and debris. We walk the roof and property with you to make sure you are satisfied, and we provide care information for your new metal roof. We leave your property clean and ready for you to enjoy.

Pricing for metal roofing in Bon Air depends on the size and complexity of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot, but keep in mind that local code limits the number of existing layers, so we will verify that during the estimate. Repairs start at $450, and screw replacement or re-fastening starts at $750. For a precise quote tailored to your Bon Air home, call us at (804) 823-8960. We provide free estimates and honest advice.

My Bon Air ranch has heavy algae streaks on the shingles. Is a metal roof over shingles a good option?
Yes, a metal roof over shingles is often a great fit for Bon Air ranches and split-levels. It saves the cost of tear-off and disposal, and it can be installed over a single layer of existing shingles if the roof deck is in good condition. However, local code limits the number of layers, so we will check that during your free estimate. We also make sure the new metal roof has proper ventilation and flashing to prevent future moisture issues.
A storm just knocked limbs onto my roof in Bon Air. How quickly can you respond for emergency repair?
We understand that storm damage can be stressful. We offer free inspections for storm and wind damage, and we prioritize emergency repairs. Call us at (804) 823-8960 as soon as possible, and we will schedule an inspection to assess the damage and provide a repair estimate. Our team is experienced with fallen-limb punctures, wind-lifted panels, and flashing failures common after Virginia thunderstorms.
What does a typical metal roof replacement cost for a 1,500 square foot home in Bon Air?
For a 1,500 square foot home, a metal roof replacement might range from around $13,500 to $18,000 depending on the material and complexity. That is based on our starting price of $9 per square foot for replacement, but factors like roof pitch, number of penetrations, and accessibility can affect the final cost. We recommend a free on-site estimate to give you an accurate figure. Call (804) 823-8960 to schedule.
Do I need a permit for a metal roof installation in Bon Air, and can you handle it?
Yes, roofing permits are commonly required for a full replacement or re-roof in Bon Air, and the requirements vary by jurisdiction. We handle the permitting process for you, including submitting plans and coordinating inspections with the local building department. We will verify the specific rules for your property during the estimate process.
My Bon Air neighborhood has an HOA. Can you help with approval for a metal roof?
Yes, we can provide the documentation and specifications your HOA may require for design review, such as panel profiles and color samples. We recommend checking with your HOA early in the process, and we will coordinate with them as needed. Some historic districts may also have design restrictions, and we can help you navigate those.
Are you fully insured for roofing work in Bon Air?
Yes, we are fully insured, carrying both general liability and workers' compensation insurance.
How often should I have my metal roof inspected in Bon Air, and what maintenance does it need?
We recommend an inspection every two to three years, especially after major storms. Bon Air's tall pines drop debris that can clog gutters and valleys, and shade can promote moss growth. Regular maintenance includes clearing debris, checking fasteners for tightness, and inspecting flashing and seals. We offer free estimates for inspections and can advise on any needed repairs or coating to extend the life of your roof.
Why choose us?

Trusted professionals in Richmond

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Richmond

All your work handled by qualified professionals in Richmond

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

353+ Verified Client Reviews in Richmond

⭐⭐⭐⭐⭐ 4.9/5 · 353 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Richmond · Response within 24h · No commitment · ☎ (804) 823-8960

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Richmond ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm